Ibase SI-18 User Manual download pdf (Page 11)

Mounting SI-18 to the Wall

You can install SI-18 on plastic (LCD monitor), wood, drywall surface over studs, or

a solid concrete or metal plane directly. Ensure the installer uses at least four M3

length 6mm screws to secure the system on wall. Six M3 length 6mm screws are

recommended to secure the system on wall.

Fasteners are not included with the unit, and must be supplied by the installer. The

types of fasteners required are dependent on the type of wall construction. Choose

fasteners that are rated either ”Medium Duty“ or ”Heavy Duty.“ To assure proper

fastener selection and installation, follow the fastener manufacturer’s

recommendations.

Wall mounting requirements

Note: Before mounting the system on wall, ensure that you are following all

applicable building and electric codes.

When mounting, ensure that you have enough room for power and signal cable

routing. And have good ventilation for power adapter. The method of mounting must

be able to support weight of the SI-18 plus the suspend weight of all the cables to

be attached to the system. Use the following methods for mounting your system:

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

No comments

Ibase SI-18 User Manual Page 11